Configure coda-4680 to use QoS ?

Options
Michael G. #3306
Michael G. #3306 Posts: 5 ✭✭
in Internet
Can I configure the coda-4680 to QOS.
Example I want my XBOX to have highest priority and ftp server to have lowest priority.
Thank You in advance

Answers

  • GOAT
    GOAT Posts: 227 ✭✭
    Options
    I do not believe that this can be done on the CODA-4680. You'll need to bridge it, and use a router that has QoS capability.
  • Nicholas M. #6210
    Nicholas M. #6210 Posts: 35 ✭✭
    Options

    To confirm what GOAT said, you can only manage QoS if you put the modem in bridge mode and use your own router.

  • Julien C. 19625
    Julien C. 19625 Posts: 197 ✭✭
    Options
    I have pretty good result using a dd-wrt router with the following setting (for 30mbps/10mbps)
    - Port: WAN
    - Packet Scheduler: HTB
    - Queuing discipline: FQ_CODEL
    - Downlink: 31000kbps
    - Uplink: 10500kbps
    - TCP-Packet Priority: Check all
    ---
    The trick is to limit the speed to 90-95% of your real speed so you never have a fully loaded connection even when downloading / uploading at full speed. My real speed is about 35mbps down so setting it up to 31000kbps was perfect, no lag while gaming and streaming Netflix at the same time!
This discussion has been closed.

Categories